Energy & demand.
Load, price, and equipment managed together.
21 listings · 1 in early access · 20 built on request
21 shown
Peak DemandAgentReview energy demand and propose pre-cooling or staged loads within equipment and comfort limits.Early accessArray YieldAgentCompares inverter production with the yield irradiance and temperature predict. Proposes a cleaning or inspection work order when it lags.Built on requestBattery DispatchAgentReads battery state of charge, the site load forecast, and day-ahead prices, and proposes tomorrow's charge and discharge schedule.Built on requestBill ReconcileAgentEach utility invoice checked against interval meter data and the rate on file, with a dispute or corrected payable proposed for mismatches.Built on requestCarbon WindowAgentFlexible building loads and EV charging shifted into the hours the grid runs cleanest, with the estimate recorded for your reporting.Built on requestCharge BalancingAgentReads EV charger sessions and the site meter, and proposes per-charger current limits that keep total load under the service capacity.Built on requestDaylight DimmingAgentCompares each zone's measured light with its target, sky cover, and occupancy. Proposes dimming schedule changes for approval.Built on requestDepot ChargingAgentBuilds each vehicle's overnight charge schedule from state of charge, departure time, and tariff periods, and proposes it to the depot lead.Built on requestEvent ResponseAgentTurns a demand-response event notice into a curtailment plan for the event window, checked against meters and equipment state.Built on requestExport LimitAgentWatches inverter output, site load, and the utility's export limit or price signal, and proposes an active-power cap on the solar inverters.Built on requestFuel ReserveAgentReads tank level sensors, generator run hours, NWS alerts, and open purchase orders, and proposes a fuel delivery when reserve runs short.Built on requestGenerator TestAgentReads the generator run log, the CMMS test interval, air-quality forecasts, and occupancy, and proposes a test slot with its work order.Built on requestOptimal StartAgentPicks each morning's HVAC start time from overnight zone temperatures, the forecast, and the occupancy schedule, and proposes it.Built on requestPower FactorAgentReactive demand read from your power meters against the tariff's power-factor clause, with capacitor bank staging or a work order proposed.Built on requestPrice ShiftAgentDeferrable production runs moved to cheaper hours on the wholesale day-ahead curve, with the real-time price watched after approval.Built on requestRate SwitchAgentTwelve months of interval data priced against every eligible rate at your utility, with a switch request proposed when one costs less.Built on requestSchedule LeakAgentEquipment found running outside the occupancy schedule, from platform status, badge events, and meter load, with the schedule fix proposed.Built on requestStorm ReserveAgentReads NWS alerts, battery state of charge, and generator status, and proposes a reserve hold and readiness checks before an outage risk.Built on requestSubmeter DriftAgentSubmeter totals checked against the main meter, with stuck, gapped, or stepped readings raised as an investigation ticket.Built on requestTariff WindowAgentRecurring loads such as pumps and heating moved out of the hours your utility rate charges most, one schedule change at a time.Built on requestThermal StorageAgentIce or chilled-water tank state read with the forecast and your rate periods; a nightly charge target and daytime discharge plan proposed.Built on request
Start with one job.
Tell us the one thing you’d most like off your plate. We’ll set Fibric up around it, with you.