Exception Routing
Review line exceptions and propose reroutes, reschedules, or dispatches.
View listingProduction & maintenance
Predictive Maintenance
Review equipment telemetry and propose maintenance work orders for suspected faults.
View listingAir Leak
Reads compressor load and air flow during idle periods and proposes a leak survey work order with the zones to check first.
View listingAlarm Flood
Counts SCADA alarms per operator hour, finds chattering and stale points, and proposes priority and deadband changes for approval.
View listingBacklog Priority
Ranks the open maintenance backlog by asset priority, safety flags, and tomorrow's production plan, and proposes the next-day sequence.
View listingBatch Deviation
Watches a running batch against its recipe limits and proposes the deviation record and operator action when a value leaves them.
View listingCalibration Due
Finds every instrument due by date or use count and proposes the calibration work order and a swap-in before the station needs it.
View listingChangeover Plan
Reads the released work order queue and the recipe on the line, and proposes an order sequence and changeover window that cuts setup time.
View listingClean Cycle
Checks each clean-in-place run against the circuit's required temperature, flow, and time and proposes accepting it or a rerun.
View listingCold Chain Excursion
Matches reefer and logger temperatures to lots in transit. Proposes a hold, quality review, or consignee notice on a limit breach.
View listingCold Room Watch
Reads walk-in and case temperatures, door state, and compressor runtime. Proposes a service call or product move before the limit.
View listingCycle Drift
Times each station's cycles from controller timestamps against the SKU standard and proposes a parameter check or a standard update.
View listingFill Weight
Watches net contents per SKU against the label and proposes a filler setpoint change or a line stop before packages fall short.
View listingFood Safety Log
Fills HACCP monitoring records from sensor readings and proposes the corrective action record when a check is missed or out of range.
View listingInspection Due
Tracks statutory examination dates for cranes, lifting gear, and vessels and proposes the inspection work order or a removal from service.
View listingLine Downtime
Pins each unplanned stop to a station and cause from PLC faults and operator reason codes. Proposes work orders for repeat stops.
View listingOEE Loss
Computes shift OEE from PLC good and reject counts against scheduled time, and proposes corrections where operator logs disagree.
View listingParts Reorder
Compares spare-part stock with open work orders, past consumption, and supplier lead times. Proposes a purchase requisition for approval.
View listingPermit Check
Checks a permit-to-work request against isolation status, badge events, and training records, and proposes issue or refusal with the gaps.
View listingQuality Hold
Traces a failed lot through its genealogy to every downstream lot and proposes the hold before any of them ship.
View listingScrap Rate
Charts rejects per SKU and station against control limits from PLC counters and camera rejects. Proposes a parameter check or a hold.
View listingTool Wear
Tracks cutting-tool cycles and spindle load against rated life from machine controllers, and proposes a tool change and crib pick in time.
View listingAbout production & maintenance listings
Every listing here documents one operational job: what Fibric reads from it, what it can propose, what it needs, and where it stops. Reference listings describe the vendor's published interfaces; Fibric builds them under a managed deployment when you request them. Selecting a listing installs nothing.
Other operators categories
Operator
Orders & fulfillment
23 listings
Operator
Customer support
22 listings
Operator
Sales, quotes & revenue
22 listings
Operator
Finance & billing
21 listings
Operator
Inventory & supply
22 listings
Operator
Workforce & scheduling
22 listings
Operator
Facilities & comfort
21 listings
Operator
Energy & demand
21 listings