Operator by Fibric
Guest Comfort
Tunes light, air, and access to the rhythm of arrival and rest, balancing comfort against energy spend room by room.
View details
← Marketplace
ConnectorSensing & telemetry
BACnet / IP
Reads objects and properties off the building automation network directly, no gateway box in the rack.
About
The BACnet/IP connector speaks the protocol your controllers already speak. It discovers devices on the subnet, reads analog and binary objects and their properties (present value, setpoint, status flags), and uses COV subscriptions where controllers support them so a changed value arrives as an event instead of a poll. Setpoints, occupancy, damper positions, and equipment state land in Fibric stamped with device, object, and the moment they changed.
BACnet/IP carries no authentication of its own, so the connector is deliberately read-only in this listing and every readable object sits on an explicit allow-list; access is further scoped by network segment and BBMD configuration. This connector is available now: built and maintained by Fibric, and wired into your site with a Fibric deployment engineer through the early-access program.
Highlights
- Reads setpoints, occupancy, equipment state
- No gateway box
- Read-only by design; it can inform an action but never take one
- Provisioned with a deployment engineer through the early-access program
- Kind
- Connector
- Category
- Sensing & telemetry
- Publisher
- Fibric
- Availability
- Early access
- Delivery
- Managed by Fibric; nothing to install
- Data direction
- Read-only
- Pricing
- Early access
- Sold by
- Fibric
- Support
- Developed and supported by Fibric
- Tags
- building, protocol, real-time, hardware
Authentication
BACnet/IP itself has no authentication, so access is scoped by network segment and BBMD configuration plus Fibric's per-object read allow-list.
What it reads
- Zone temperatures, setpoints, and occupancy state per controller
- Equipment status: fan and pump run state, damper and valve positions, alarms
- COV change events on subscribed objects, timestamped at the change
What it can do
This is a sensing source: it reads, it does not write. Operators act through the write-capable connectors alongside it.
How it works
1
Sense
Zone temperatures, setpoints, and occupancy state per controller.
2
Reason
Operators reason over this connector's signals next to the rest of your stack, so decisions are grounded in the same records you run on.
3
Act
Nothing. This is a sensing source; operators act through the write-capable connectors alongside it.
Pricing
Early access
This connector is provisioned through the early-access program. A deployment engineer wires it with you as part of onboarding; there is no separate line item and no charge until it carries production traffic.
- Deployment engineer
- Wires and verifies the integration with you during onboarding
- Propose-only mode
- See every action it would take before it takes one
- Receipts and audit trail
- Every read and write on the record, exportable any time
- Support from the builders
- Developed, run, and supported directly by Fibric
Questions about BACnet / IP?
Ask about this listing
Answers are based on this listing. For anything it can't answer, our team can.
For anything this page can't answer, talk to us.
Requirements
- IP reachability to the BACnet subnet, or a BBMD to cross routers
- A device and object inventory (or a discovery window) to build the read allow-list
Your deployment engineer verifies each line with you during onboarding.
Support and resources
Supported by the people who built it
This connector is developed, run, and supported by the same Fibric team. Support starts during onboarding with a named deployment engineer and doesn't hand you off afterward.
Works with
The connectors and operators this pairs with in production.
Operator by Fibric
Peak Demand
Shaves peak demand without anyone noticing: pre-cools, stages loads, and respects every comfort and safety guardrail you set.
View details
Operator by Fibric
Predictive Maintenance
Hears the equipment going wrong before it fails. It reads vibration and runtime, predicts the fault, and opens the work order early.
View details
Control & actuation connector
Tridium Niagara
Writes setpoints and overrides back to the building management system, fail-closed. Every command leaves a receipt you can audit.
View details
Building platforms connector
Johnson Metasys
Reads and supervises the Metasys building management system: sense the equipment, reason about comfort, act fail-closed.
View details
This connector is developed, published, and supported by Fibric. It integrates with BACnet / IP through published APIs. Third-party names and logos identify the systems an integration connects to; they are the property of their respective owners, who are not affiliated with Fibric and do not sponsor or endorse this listing. Trademark policy
Bring BACnet / IP into your early-access deployment
Early access means a deployment engineer wires this with you, and it runs propose-only until you approve live actions.