Operator by Fibric
Peak Demand
Shaves peak demand without anyone noticing: pre-cools, stages loads, and respects every comfort and safety guardrail you set.
View details
← Marketplace
ConnectorBuilding platformsEarly access
Schneider EcoStruxure
Reads power, HVAC, and metering from EcoStruxure so an energy operator can shave peak load without breaching comfort.
About
The EcoStruxure connector integrates with Schneider Electric's EcoStruxure building platform through its web services, reading the power, HVAC, and metering points the platform supervises. Interval meter data, equipment state, and alarm activity arrive as governed events with site and tenant stamped on each, giving the Peak Demand operator the load picture it needs to stage equipment ahead of a peak rather than react to one.
Writes, where enabled, are supervisory and stay inside the guardrails you set: allow-listed points, clamped ranges, single-flight, idempotent, and propose-only to start, each with a receipt. Fibric builds and maintains this connector independently; it is not a Schneider Electric product and no partnership or certification is claimed. It is available now, wired with a Fibric deployment engineer through the early-access program.
- Kind
- Connector
- Category
- Building platforms
- Publisher
- Fibric
- Availability
- Early access
- Sold by
- Fibric
- Support
- Developed and supported by Fibric
Authentication
Authenticates with a dedicated EcoStruxure Web Services account, scoped to the sites and points in the connector's configuration.
What it reads
- Interval metering: kW demand, kWh, and per-feeder load
- HVAC equipment state and zone conditions under EcoStruxure supervision
- Alarm and event activity from the platform
What it can do
- Write a supervisory setpoint or staging command to an allow-listed point, propose-only to start
- Release a Fibric-held override when the demand window passes
Requirements
- An EcoStruxure server with web services enabled and reachable
- A dedicated web services account limited to in-scope points
- Comfort and safety guardrails agreed per site before any write is enabled
Works with
The connectors and operators this pairs with in production.
Operator by Fibric
Guest Comfort
Tunes light, air, and access to the rhythm of arrival and rest, balancing comfort against energy spend room by room.
View details
Sensing & telemetry connector
Modbus TCP
Talks to the meters, drives, and PLCs that already run your plant, polling registers on a schedule and normalizing the readings.
View details
Control & actuation connector
Tridium Niagara
Writes setpoints and overrides back to the building management system, fail-closed. Every command leaves a receipt you can audit.
View details
Control & actuation connector
Twilio
Calls and texts the right person when an operator decides to act. Messages are throttled and deduplicated, so one event never becomes a flood.
View details
This connector is developed, published, and supported by Fibric. It integrates with Schneider EcoStruxure through published APIs. Third-party names and logos identify the systems an integration connects to; they are the property of their respective owners, who are not affiliated with Fibric and do not sponsor or endorse this listing. Trademark policy
Bring Schneider EcoStruxure into your early-access deployment
Early access means a deployment engineer wires this with you, and it runs propose-only until you approve live actions.