Operator by Fibric
Guest Comfort
Tunes light, air, and access to the rhythm of arrival and rest, balancing comfort against energy spend room by room.
View details
← Marketplace
ConnectorBuilding platformsEarly access
Siemens Desigo CC
Unifies Desigo CC points for fire, HVAC, and access into one model, with supervisory writes through the governed executor.
About
The Desigo CC connector integrates with Siemens Desigo CC, the management station that unifies fire safety, HVAC, and access disciplines on many campuses. Through its API it reads point values, alarm and event activity, and schedule state across those disciplines, so an operator sees one coherent model of the building rather than three consoles. Fire and life-safety points are read-only without exception.
Supervisory writes to HVAC and comfort points, where enabled, go through Fibric's executor: allow-listed, single-flight per point, idempotent on retry, propose-only to start, and receipted per command; when trust is in doubt, nothing runs. Fibric builds and maintains this connector independently; it is not a Siemens product and no partnership or certification is claimed. It is available now, wired with a Fibric deployment engineer through the early-access program.
- Kind
- Connector
- Category
- Building platforms
- Publisher
- Fibric
- Availability
- Early access
- Sold by
- Fibric
- Support
- Developed and supported by Fibric
Authentication
Authenticates to the Desigo CC API with a client certificate, scoped to the disciplines and points in the connector's configuration.
What it reads
- Point values across fire, HVAC, and access disciplines under Desigo CC
- Alarm and event activity as it is raised, escalated, and cleared
- Schedules and their current effective state
What it can do
- Write a supervisory setpoint to an allow-listed HVAC point, propose-only to start
- Acknowledge a non-safety alarm as part of a vetted, receipted plan
Requirements
- A Desigo CC management station with its API enabled and reachable
- Certificate provisioning for the Fibric API client
- An allow-list that keeps fire and life-safety points strictly read-only
Works with
The connectors and operators this pairs with in production.
Operator by Fibric
Peak Demand
Shaves peak demand without anyone noticing: pre-cools, stages loads, and respects every comfort and safety guardrail you set.
View details
Operator by Fibric
Field Dispatch
Gets the right person to the right place: reads the live picture, plans the route, and dispatches the team that can fix it.
View details
Control & actuation connector
Access Control
Grants, revokes, and schedules door access on your policy. Commands run single-flight per door, so a glitch never unlocks the same entrance twice.
View details
Sensing & telemetry connector
BACnet / IP
Reads the building automation bus directly, streaming setpoints, occupancy, and equipment state into one operational picture.
View details
This connector is developed, published, and supported by Fibric. It integrates with Siemens Desigo CC through published APIs. Third-party names and logos identify the systems an integration connects to; they are the property of their respective owners, who are not affiliated with Fibric and do not sponsor or endorse this listing. Trademark policy
Bring Siemens Desigo CC into your early-access deployment
Early access means a deployment engineer wires this with you, and it runs propose-only until you approve live actions.